Lian-Li compatible O11 Dynamic EVO, Tempered Glass - Noir

Product Information

The Lian Li O11 Dynamic Evo launching today represents the next step of the O11 Dynamic as envisioned by Lian Li and der8auer.

That leaves us feeling a bit mixed about the side mount, however, because as great as it looks if you were to put an RGB-lit cooler or fan set there, using it will likely create a dust problem. With a bit of creativity and with the aim of accommodating the main part of the cooling system on the back, this should no longer be a problem. Lian Li says the O11D EVO supports Extended ATX (EATX) motherboards up to 11 inches deep, but the full spec for EATX is 13 inches, and motherboards that fall between that size and ATX get labeled in a confusing manner. In both Normal and Reverse modes, up to a 360mm radiator can be mounted on the top, side, and bottom, with the latter two having support for 280mm models, also.Taking modular to new heights, this mid-tower chassis is configurable in two different ways – Normal or Reverse. Side: 360mm × 1 or 280mm × 1 *Inner scenario total max thickness: 83mm(120mm fan on top and bottom) 63mm(140mm fan on top and bottom) *Outer scenario total max.

We'd recommend a more elaborate build with three 120mm intake fans on the bottom, since that's where the dust filter is located, plus some kind of radiator and fan combo on the top to aid in voltage-regulator cooling. When moved to the upper position, the top can only accommodate a 46mm thick radiator, while the bottom increases to 126mm of clearance. In addition to its striking aesthetics, the O11D EVO RGB boasts an expanded size to accommodate the latest gaming hardware seamlessly.Positioned at both the top and bottom edges of the chassis, these strips extend the entire length of the tempered glass panels, resulting in a visually stunning design.